Is your chainsaw starts seem boring and not so good? It seems that the time to replace the chain. To do this, you must know the length of the two with a saw blade and the length and size of the chain. If you checked the manufacturer's graphics seem a bit 'overwhelming. But it is actually quite simple if you understand what it is about the length of the blade and the saw chain.
If you're ready to replace the chain, theThe first thing to do is to determine the size of the chainsaw bar. If you have a chainsaw Oregon occur, it should be easy. Just select the first two numbers of ten digits, which is available on the motor side of the blade. This is the length of chain saw bar.
Do not have a chainsaw Oregon, which simply means the length of the blade? So here are some tips to see in person.
What is the best way to measure the blade of a chainsaw?
To measure the chainsawBlade itself is quite easy to do. Simply enter your meter at the end of the bar against the housing and measure the bar down to the tip of the blade.
Blade and the bar are two terms that are used both to demonstrate the same item. This is the blade that extends from the motor body and brings the chain that looks like the saw for you.
The producers were kind enough to standardize the two-inch blade lengths increase. Morecommon sizes are 16, 18, and 20 inches although the full range goes from 10 to 42 inches! When you measure your blade, round up to the nearest 2-inch measurement if needed.
Measuring A Chainsaw Chain
To measure the chain on your chainsaw, there are two things you will need to know ... the number of drive links and the pitch of the chain.
A drive link is simply a tooth on the chain and your chain's length is determined by the number of drive links (or teeth). The pitch of the chain also affects the size of the drive links.
The pitch of the chain is important to know as it must match the pitch of both the drive sprocket as well as the bar nose sprocket. This should be stamped on the drive link but if you need to measure the pitch yourself, take the distance between any 3 rivets of the chain and divide by 2.
As an example, a 1/4" pitch chain might have 52 drive links and be 2.17 feet in length, while a 3/8" pitch with 52 drive links would be 3.18 feet in length. So the pitch affects the drive link size which affects your blade's length.
Still unsure? Just check with your chain saw's manufacturer or anyone who makes chains and they will be able to clear up any confusion you may have.
0 comments:
Post a Comment